worldwide shipping 
most new products are shipped factory direct from MID-WEST locations.
We accept  (over the phone)
or check/moneyorder
Please inspect items upon arrival and notify us immediately of any damage caused by shipping or mis-handling for refund or replacement (30 days maximum) from time of purchase.
All prices on web page plus shipping & handling
*** Prices are subject to change without notice ***
Phone # 503-767-3660  Toll free 877-602-3994
|
Gear Shift Lever Boots
|
All dubuques... L, LA, M, MT, 40, 320, 330, 420, 430, 435, 1010
click onto picture to enlarge
(pn JDM-S493) |
$10.00
plus S & H |
|
820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 2955, 300B
(pn JDM-S130) |
$10.00
plus S & H |
|
|
Seat shock absorber (with rubber bushings)
|
50, 520, 530, 620, 630, 720, 730, 80, 820, 830
2 cylinder
click onto picture to enlarge
(pn JDM-S411) |
with float ride seat |
$45.00
plus S & H |
Throttle Levers
|
H, M
(pn JDM-S385) |
replaces H281R |
$39.00
plus S & H |
|
A, B (late style 1947 and up)
(pn JDM-S386) |
replaces B2536R |
$39.00
plus S & H |
|
420C to sn 139999, 420 series I, S, T, U, V, and W to sn 125000, 420 LP sn 125001 to 139999, 320 up to sn 325000
click onto picture to enlarge
(pn JDM-S139) |
replaces M1758T |
$37.50
plus S & H |
|
|
|
Belt Pulley brake
|
A, B, G, D, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830
click onto picture to enlarge
(pn JDM-S187) |
woven lining with brass rivets, all countersunk |
$9.99
plus S & H |
Gauges
Water Temp Gauges
|
A, B, D, G, H, 40
click picture to enlarge
John Deere No Longer on Face
(pn JDM-R3811) |
white face with 3' lead |
$38.00
plus S & H |
|
A, B, D, G, H, 40
click picture to enlarge
John Deere No Longer On Face
(pn JDM-R3812) |
white face with 6' lead |
$38.00
plus S & H |
|
50, 60, 70, 520, 530, 620, 630, 720, 730
click picture to enlarge
John Deere No Longer On Face
(pn JDM-R3813) |
black face with 3' lead |
$38.00
plus S & H |
|
50, 60, 70, 520, 530, 620, 630, 720, 730
(pn JDM-R3814) |
black face with 6' lead |
$38.00
plus S & H |
Oil Pressure Gauges
|
A,B,D,G unstyled, 40
click picture to enlarge
(pn JDM-R3799) |
white face without studs |
$33.00
plus S & H |
|
A, B, D, G, H styled, 40
click picture to enlarge
(pn JDM-R3800) |
white face with studs |
$33.00
plus S & H |
|
50, 60, 70, 520, 530, 620, 630, 720, 730 Gas
(pn JDM-R3801) |
black face with studs |
$30.00
plus S & H |
Amp Gauges
|
A, B, D, G, H, 40
click picture to enlarge
(pn JDM-R3802) |
white face |
$30.00
plus S & H |
|
50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830
(pn JDM-R3803) |
black face |
$30.00
plus S & H |
Cut outs
6 volt cut-out
(positive or negative ground)
click picture to enlarge |
Delco-Remy original looking cut out...
electronic..not points.
$5.00 refundable core charge, when we
get your old rebuildable cutout back |
$50.00
plus S & H |
|
electronic voltage regulator
click picture to enlarge
|
6, 12, or 24 volt
cut-out
(pnACE-MAD100) |
$45.00
plus S & H |
|
6 volt cut out
click picture to enlarge
|
(pn JDM-BB09) |
$29.00
plus S & H
|
|
|
|
Steering wheels
|
L, LA, LI (some 1945 & all 1946) M, MI, MT, early 40, 320
click onto picture to enlarge
(pn JDM-S282) |
replaces AL2180T, 15" diameter, tapered, keyed, stepped hub, 11/16"..3/4" shaft |
$55.00
plus S & H |
|
Late 40, Early 420 up to sn 125000
(pn JDM-S336) |
replaces AM2600T, 17&5/8" diameter, tapered, keyed, stepped hub 11/16"..3/4" shaft 3 spokes |
$55.00
plus S & H |
|
320 (sn 325000 & up) 330, 420 (sn 125000-140000) with slant steering, 430, 435
(pn JDM-S286) |
replaces AM3914T, 18" diameter keyed hub, 11/16"- 3/4" shaft, 3 covered to center spokes |
$97.50
plus S & H |
|
H (1941 & up)
(pn JDM-S284) |
replaces AH675R, 15" diameter keyed hub, 11/16"-3/4" shaft 3 spokes |
$55.00
plus S & H |
|
Unstyled B up to sn 60000 (thru end of 1938) Unstyled BR
click onto picture to enlarge
(pn JDM-S375) |
replaces AA380R, 16" diameter, stepped hub, 3/4"-7/8"shaft 3 flat spokes |
$59.00
plus S & H |
|
Unstyled A, (up to 1938) Unstyled AR (up to 1938) D, sn 109944-sn 143800, G (up to 1938)
(pn JDM-S240) |
replaces AA380R, 18" diameter, stepped hub, 3/4"-7/8" shaft 3 flat spokes |
$59.00
plus S & H |
|
Early styled B (1939-40)
(pn JDM-S305) |
replaces AB218R, 16" diameter, stepped & keyed hub 3/4"-7/8" shaft 3 round spokes |
$59.00
plus S & H |
|
Early Styled A, AR, D, G (1939-40)
(pn JDM-S303) |
replaces AA380R, 18" diameter, stepped hub, 3/4"-7/8" shaft 3 round spokes |
$59.00
plus S & H |
|
B (1941-1948)
(pn JDM-S341) |
replaces AA380R, 16" diameter, tapered & keyed hub with rounded edge, 3/4"-7/8" shaft 3 spokes |
$55.00
plus S & H |
|
A, B, G, D (1941 & up) R, 50, 60, 70 with power steering, 80 up to sn 8203099 with power steering, 520 up to sn 5208099, 620 up to sn 6213099, 720 up to sn 7214899 with power steering, 820 up to sn 8203099 with power steering (2 cylinder with 3 spokes)
(pn JDM-S229) |
replaces AA380R, 17&5/8" diameter, tapered & keyed hub, 3/4"-7/8" shaft 3 spokes |
$55.00
plus S & H |
|
70, 720, 80, 820 with manual steering, R with manual or power steering
(pn JDM-S301) |
replaces AR505R, 20"diameter, tapered & keyed hub, 11/16"-7/8" shaft 4 spokes |
$59.00
plus S & H |
|
520 sn 52088100 & up, 530, 620 sn 6213100 & up, 630, 720 sn 7214900 & up, 730 gas and diesel, 80, 820 sn 8203100 & up, 830 (all with power steering) shiny finish
click onto picture to enlarge
(pn JDM-S399) |
replaces AF3856R, 18" diameter, splined hub, 7/8" shaft, 3 covered to center spokes |
$85.00
plus S & H |
|
1010, 1020, 1520, 2010, Early 2020, 2510, 3010, Early 3020 up to sn 122999, 4010, Early 4020 up to sn 200999, 4520, 4620, 5010, 5020, 6030, 7030, 7520
(pn JDM-S309) |
replaces AR26625, 16" diameter, splined hub, 38 splines, 13/16" shaft, 3 covered to center spokes |
$65.00
plus S & H |
|
3020 sn 123000 & up, 4000, 4020 sn 201000 & up, 4030, 4040, 4050, 4230, 4430, 4630, 4650, 4850, 4640, 4840, 8430, 8440, 8640, 8450, 8650, 8630, 8850
(pn JDM-S539) |
replaces T22875, subs to AR78405, 16" diameter, 7/8" splined hub |
$65.00
plus S & H |
|
|
|
Lights
|
A, AO, AR, B, D, G, H, R, 50, 60, 70
(pn JDM-R3807) |
tear drop headlight 6 volt 5" diameter
replaces AA3075R AF3817R |
$67.50
plus S & H |
|
A, AO, AR, B, D, G, H, R, 50, 60, 70
(pn JDM-R3808) |
tear drop headlight 12 volt 5" diameter
replaces AF710R AF3816R |
$67.50
plus S & H |
|
520, 530, 620 (to sn 6213099)
(pn JDM-R3863) |
headlight 12 volt 5" diameter
replaces AA6504R |
$75.00
plus S & H |
|
A (from sn 584000) G (from sn 26000)
(pn JDM-R3863) |
Taillight 12 volt 5" replaces AA3867R |
$75.00
plus S & H |
|
A (from sn 584000) G (from sn 26000) with bullit tail light
 
click onto either picture to enlarge
(pn JDM-R3864) |
Taillight 12 volt 5" diameter replaces AA4529R |
$110.00
plus S & H |
|
A (from sn 584000) G (from sn 26000)
(pn JDM-R3865) |
Rear combo light 12 volt 5" diameter replaces AA4791R |
$120.00
plus S & H |
|
B (from sn 201000) R
(pn JDM-R3866) |
Taillight 6 volt 5" diameter replaces AB3549R |
$75.00
plus S & H |
|
B (from sn 201000) R with bullet tail light
(pn JDM-R3867) |
Taillight 6 volt 5" diameter replaces AB3975R |
$120.00
plus S & H |
|
B (from sn 201000) R
(pn JDM-R3868) |
rear combo light 6 volt 5" diameter replaces AB4037R |
$120.00
plus S & H |
|
50, 520, 530, 60, 620, 630, 70, 720, 730, GAS 70, 720, 730, 820, 830, Diesel with electric start
(pn JDM-R3869) |
rear combo light 12 volt 5" diameter replaces AA5199R |
$85.00
plus S & H |
|
70, 720, 730, 80, 820, 830 Diesel with pony motor
(pn JDM-R3870) |
rear combo light 6 volt 5" diameter replaces AF3088R |
$85.00
plus S & H |
|
|
|
|
|
|
|
|
|
|
| |
|
Seat Components
|
A,B, D, G, H, L
click onto picture to enlarge
(pn JDM-R0640) |
metal pan seat..9 hole |
$55.00
plus S & H |
Pan seat..tie-on cushion
|
orange & white, yellow & white, red & white, green & white, silver, green & red
click onto picture to enlarge
(pn JDM-R1012-2603) |
2" foam 21" wide |
$28.00
plus S & H |
|
red & white, blue & white, yellow
(pn JDM-R2076-2476) |
(vinyl coated nylon..19" wide) |
$17.50
plus S & H |
|
red & white, orange & white, yellow, black & white
(pn JDM-R2080-2477) |
(vinyl coated nylon..21" wide) |
$17.50
plus S & H |
John Deere models
A, B, D, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, GAS..Standard seat)
|
seat bottom
(pn JDM-R0172) |
yellow vinyl on wood ..19&1/2" |
$50.00
plus S & H |
|
seat bottom
click onto picture to enlarge
(pn JDM-R0863) |
black vinyl on wood ..19&1/2" |
$47.00
plus S & H |
John Deere models
A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830
|
seat back
(pn JDM-R0173) |
yellow vinyl on wood..6" high |
$45.00
plus S & H |
|
seat back
(pn JDM-R0993) |
yellow vinyl on wood..9" high |
$52.50
plus S & H |
|
arm rests (pair)
(pn JDM-R1187) |
yellow vinyl on wood cushion only |
$40.00
plus S & H |
|
arm rests (pair)
(pn JDM-R1188) |
yellow vinyl on steel. with metal frame clip |
$80.00
plus S & H |
|
seat back
click onto picture to enlarge
(pn JDM-R0864) |
black vinyl on wood..6" high |
$37.00
plus S & H |
|
arm rests (pair)
(pn JDM-R1189) |
black vinyl on wood (cushion only) |
$40.00
plus S & H |
|
arm rests (pair)
(pn JDM-R1190) |
black vinyl on steel. with metal frame clips |
$75.00
plus S & H |
John Deere models
M, MT, 40 utility, 320, 330, 420, 430, 435, 440
|
seat bottom
click onto picture to enlarge
(pn JDM-R0991) |
black vinyl on wood |
$50.00
plus S & H |
|
seat back
(pn JDM-R0992) |
black vinyl on wood |
$35.00
plus S & H |
|
seat bottom
click onto picture to enlarge
(pn JDM-R0996) |
yellow vinyl on wood |
$47.50
plus S & H |
|
seat back
(pn JDM-R0997) |
yellow vinyl on wood |
$32.50
plus S & H |
70, 520, 530, 620, 630, 720, 730, Gas with float ride seat
John Deere models
,
70, 80, 720, 730, 820, 830 Diesel with Pony Motor
|
seat bottom
(pn JDM-R0994) |
yellow vinyl on wood..20&5/8" wide |
$50.00
plus S & H |
John Deere models
70, 80, 720, 730, 820, 830 Diesel Float Ride Seat with electric start
|
seat bottom
(pn JDM-R0995) |
yellow vinyl on wood..22&1/4" wide |
$55.00 plus S & H |
....below is a partial listing of the decals that we can offer. ( too many to list all )..they range thru the 7400...so if you don`t see the model you are interested in..please
OR CALL 877-602-3994
Thank you
Instructions for Decal Application
Decals
1923-1938
Unstyled Tractors ( early stenciled hood )
| A |
mylar (JD100 )
vinyl die cut ( VJD100 ) |
$31.00
plus S & H
$71.00 |
| B |
mylar ( JD101 )
vinyl die cut ( VJD101 ) |
$31.00
plus S & H
$71.00 |
| D |
mylar ( JD105 )
vinyl die cut ( VJD105 ) |
$35.00
plus S & H
$71.00 |
| G |
mylar ( JD102 )
vinyl die cut ( VJD102 ) |
$31.00
plus S & H
$71.00 |
| GP |
mylar (JD104 )
vinyl die cut ( VJD104 ) |
$36.00
plus S & H
$73.00 |
| GP Wide Tread |
mylar ( JD103 )
vinyl die cut ( VJD103 ) |
$34.00
plus S & H
$71.00 |
| AR |
mylar ( JD106 )
vinyl die cut ( VJD106 ) |
$31.00
plus S & H
$71.00 |
| AO |
mylar ( JD107 )
vinyl die cut ( VJD107 ) |
$31.00
plus S & H
$71.00 |
| BR |
mylar ( JD108 )
vinyl die cut ( VJD108 ) |
$31.00
plus S & H
$71.00 |
| BO |
mylar ( JD109 )
vinyl die cut ( VJD109 ) |
$31.00
plus S & H
$71.00 |
1939-1946
Decals
Styled Hoods
| A |
early styled |
mylar ( JD111 )
vinyl die cut (VJD111) |
$31.00
plus S & H
$63.00 |
| B |
early styled |
mylar ( JD112 )
vinyl die cut ( VJD112 ) |
$31.00
plus S & H
$63.00 |
| D |
1939-up |
mylar ( JD114 )
vinyl die cut ( VJD114 ) |
$31.00
plus S & H
$63.00 |
| G |
1939-up |
mylar ( JD113 )
vinyl die cut ( VJD113 ) |
$31.00
plus S & H
$71.00 |
| H |
1939-up |
mylar ( JD115 )
vinyl die cut ( VJD115 ) |
$31.00
plus S & H
$71.00 |
| L |
styled |
mylar ( JD116 )
vinyl die cut ( VJD116 ) |
$24.00
plus S & H
$45.00 |
| LA |
styled |
mylar ( JD117 )
vinyl die cut ( VJD117 ) |
$24.00
plus S & H
$45.00 |
| LI |
styled ( black ) |
vinyl die cut ( VJD167 ) |
$47.00 plus S & H |
PLEASE if you don`t see the decal set you need ...please
call us as there are lots available that we don`t have listed.
503-767-3660 Thank you Toll free 877-602-3994
|
Disclaimer: Tony Carbaugh Enterprises LLC (Tony Carbaugh) will not be held responsible for any damage or loss due to the use of the products we sell. It is up to the customer to determine how products are used and the customer takes full responsibility for any and all safe handling, and use.
|
