Allis Chalmers Rims
Worldwide shipping 
|
Most new products are shipped factory direct from MIDWEST locations. We accept
|
(over the phone) |
B, C
|
8, 9, 10x24 |
$215.00 |
|
B, C |
8, 9, 10x24 |
$235.00 |
|
RC, WC
|
8, 9, 10x28 |
$215.00 |
| RC, WC | 8, 9, 10x28 single bevel 40 pounds |
$235.00 |
Rear rim clamps...B, IB, C
|
B, (sn 58401 & up) IB, C
(pn ACR-S276) |
plain style | $28.00 ea. |
|
B, (sn 58401 & up) IB, C
(pn ACR-S274) |
eccentric style | $28.00 ea. |
|
bolt for eccentric style rimp clamp
(pn ACR-S281) |
eccentric style | $14.50 ea. |
|
5.5x20...deep drop
|
NEW | $200.00 |
A & U Deep Drop these rims are made especially for the Allis Chalmers A & U tractors...
please specify the offset you need
|
10x28 |
$200.00 |
11x28 click picture to enlarge |
$260.00 |
| 12x28 | $260.00 |
| 13x28 | $265.00 |
| 15x28 | $320.00 |
|
10x24 (4 rail) |
54 pounds | $305.00 |
|
12x24 (4 rail) |
65 pounds | $320.00 |
|
15x24 (4 rail) |
94 pounds | $345.00 |
|
11x26 (4 rail) |
76 pounds | $295.00 |
|
12x26 (4 rail) |
78 pounds | $305.00 |
|
10x28 (4 rail) |
70 pounds | $305.00 |
|
11x28 (4 rail) |
70 pounds | $305.00 |
|
12x28 (4 rail)
|
85 pounds | $320.00 |
|
13x28 (4 rail) |
86 pounds | $325.00 |
|
15x28 (4 rail) |
97 pounds | $350.00 |
|
11x28 (5 rail) |
82 pounds | $350.00 |
|
12x28 (5 rail) |
86 pounds | $350.00 |
|
13x28 (5 rail) |
90 pounds | $360.00 |
|
15x28 (5 rail) |
99 pounds | $410.00 |
|
15x30 (5 rail) |
115 pounds | $420.00 |
|
12x38 (6 rail) |
125 pounds | $430.00 |
|
14x38 (6 rail) |
140 pounds | $445.00 |
|
16x38 (6 rail) |
165 pounds | $445.00 |
|
16x34 (6 rail) |
155 pounds | $445.00 |
|
16x34 (8 rail) |
180 pounds | $515.00 |
|
16x38 (8 rail) |
226 pounds | $515.00 |
|
18x38 (6 rail) |
170 pounds | $565.00 |
|
18x38 (8 rail) |
180 pounds | $585.00 |
Hardware for spin-out rears
 click picture to enlarge |
One stop...NEW with bolt included (pnACR-70219456) |
$21.00 |
 click picture to enlarge |
rim lock pins...NEW |
$12.00 ea. |
 click picture to enlarge |
rim locks pins above are not included with refurbished main body hardware PN 70220756 |
$100.00 |
|
10x24 |
$215.00 |
|
12x24 |
$225.00 |
|
15x24 |
$230.00 |
|
12x26 |
$260.00 |
|
14x30 |
$245.00 |
|
15x30 |
$245.00 |
|
8x32 |
$255.00 |
|
10x34 |
$270.00 |
|
9x36 |
$270.00 |
|
16x34 |
$320.00 |
|
10x38 |
$260.00 |
|
11x38 |
$260.00 |
|
12x38 |
$270.00 |
|
14x38 |
$275.00 |
Front rims
|
3x15 (5 Bolt) B, C, CA, D-10, D-12
|
13 pounds | $72.50 |
|
3.5x15 (5 bolt) |
13 pounds | $75.00 |
|
3x15 blank
|
12 pounds | $65.00 |
|
B front wheel bolts JH------ 207361
|
. | $13.00 ea |
|
4.25x16 (5 hole) WC, WD, WD-45, D-10, D-12, D-14, D-15, & D-17
|
22 pounds | $90.00 |
|
4.5x16 (5 hole) WC, WD, WD-45, D-10, D-12, D-14, D-15, & D-17 (Heavy Duty) this rim would be used on working tractors or ones that have a loader on them..it has a heavier wheel center than original
|
24 pounds | $125.00 |
|
6x16 (6 hole) |
32 pounds | $80.00 |
|
8x16 (6 hole) |
32 pounds | $85.00 |
|
8x16 (8 hole) |
35 pounds | $90.00 |
Disclaimer: Tony Carbaugh Enterprises LLC (Tony, Carbaugh) will not be held responsible for any damage or loss due to the use of the products we sell. It is up to the customer to determine how products are used and the customer takes full responsibility for any and all safe handling, and use.
