Welcome to TonysTractors.com
Tony Carbaugh Enterprises, LLC
PH: 503.767.3660 Fax: 503.769.3265

12781 Marion Road SE, Turner OR 97392 Ph: 503-767-3660 Fax: 503-769-3265

TonysTractors.com                                      

  Office hours Monday - Saturday   6:30 AM  to 4:30  PM Pacific standard time  

                                     worldwide shipping    

Home | Allis Chalmers | John Deere | Ford | International Harvester
Oliver | Case | Links | About Us | Contact                           

 We accept       (over the phone)  
                
or      check/moneyorder 

                      *** Prices are subject to change without notice  ***

Please inspect items upon arrival and notify us immediately of any damage caused by shipping or mis-handling for refund or replacement (30 days maximum) from time of purchase.

                                                           All prices on web page plus freight.

                                        Need help ??  Finding the right parts ?? Contact us

                  Phone # 503-767-3660                                                       Toll free 877-602-3994

                           

                           

Boots & Knobs  

G


click picture to enlarge

gear shifter boot

(pn ACM-S263)

$14.50

plus S.H.

 

 

$

B, C, CA, G, RC, ED40, WC, WD,
WD-45, D-10, D-12, D-14, D-15
 

 
click picture to enlarge

gear shifter boot

(pn ACM-S174)

 $13.50

plus S.H.

WD, WD-45, WC, RC

 
click picture to enlarge

gear shifter boot

(pn ACM-R4802)

$13.50

 plus S.H.

D-17, D-19, D-21, 170, 210, 220, 7000, 7010, 7030, 7040, 7045,
7050, 7060, and up to 8070


click picture to enlarge

gear shifter boot

(pn ACM-S256)

 $13.50

 plus S.H.

B, IB, C, CA, WD-45, D-10, D-12, D-14, D-15, D-17, D-19, D-21

 
click picture to enlarge

gear shifter knob (slide on. replaces #226023) 

(pn ACM-R4493)

 $6.50

 plus S.H.

WD, WC, RC 

 
click picture to enlarge

gear shifter knob. threaded

(pn ACM-MA1140)

 $9.00

 plus S.H.

CA, WD, WD-45, D-10, D-12, D-14, D-15, D-17, 180, 185, 190, 190XT, 200, 210, 220

 
click picture to enlarge

throttle and hydraulic lever knob replaces #220901

(pn ACM-S184)

 $7.50

 plus S.H.

WC

 
click picture to enlarge

transmission lock out lever knob

(pn ACM-S221)

 $4.50

 plus S.H.

WC, WD, WD-45 

 
click picture to enlarge

PTO knob

(pn ACM-S221)

 $4.50

 plus S.H.

WD, WD-45


click picture to enlarge

throttle and hydraulic lever slide block

(pn ACM-S185)

$14.00

 plus S.H.

D-10, D-12, D-14, D-15, D-17, D-19

 
click picture to enlarge

control lever knob
(3 used per tractor)  replaces #228215

(pn ACM-S215)

 $6.00 ea.

 plus S.H.

WC, WD, WD-45, WF, D-10, D-12, D-17, D-21, 170, 175 and more


click picture to enlarge

plastic knob for various applications on these tractors

(pn ACM-S362)

 $5.50 ea.

 plus S.H.

D-Series knob


click picture to enlarge

knob used for various applications on the D-Series tractors

(pn ACM-DA4686V)

 $9.50

 plus S.H.

Water Temperature gauges 

B, C, CA, RC, WC, WD, WD-45

 
click picture to enlarge 

BEST quality..has Allis Chalmers in the face (stem is 3&3/8 overall length)

(pn ACM-R0934)

$30.00

 plus S.H.

WD-45 diesel, D-10, D-12, D-14, D-15, D-17 gas or diesel, D-19 gas or diesel

 
click picture to enlarge

63" lead..white
with Allis Chalmers in the face

(pn ACM-DA1378V)

$116.00

 plus S.H.

 Oil Pressure Gauges    

B, IB, C, CA, G, WC, WD, WD-45, WF

 
click picture to enlarge 

0-30# style..plain 

(pn ACM-S004)

$20.00

 plus S.H.

B, IB, C, CA, G, WC, WD, WD-45

 
click picture to enlarge 

"Best quality"
Allis
Chalmers in face 

measures .895 thickness 

(pn ACM-DA7834V)

$70.00

 plus S.H.

B, IB, C, CA, G, WC, WD, WD-45


click picture to enlarge  

next best quality
Allis Chalmers in face

measures 1.170 thickness 

(pn ACM-R3529)

(S159)

$30.00

 plus S.H.

D-10, D-12, D-14, D-15, D-17

 
click picture to enlarge 

0-80 lb style..plain 

(pn ACM-R3530)

$18.50

 plus S.H.

D-10, D-12, D-14, D-15, D-17 series I & II

 
click picture to enlarge 

zone style with
Allis Chalmers in face
0-30 lb range 

(pn ACM-S160)

$32.50

 plus S.H.

WD-45Diesel D-10,
D-12, D-14, D-15,
D-17 Series I & II

 
click picture to enlarge 

zone style with
Allis Chalmers in the face
0-30 lb range 

(pn ACM-R4015)

$56.00

 plus S.H.

D-17 series III & IV, 170

 
click picture to enlarge 

zone style with
Allis Chalmers in the face
0-45 lb range 

(pn ACM-R4016)

Not available

D-17Diesel, D-19


click picture to enlarge

(pn ACM-DA9632V)

$98.00

  plus S.H.

Ammeter gauges

B, C, CA, G, RC, WC, WD, WD-45, WF

 
click picture to enlarge   

20-20 style 

(pn ACM-R3531)

$15.00

 plus S.H.

D-10, D-12, D-14, D-15, D-17, D-19, D-21, 170, 190


click picture to enlarge 

30-30 style 

(pn ACM-R3532)

$14.50

 plus S.H.

B, IB, RC, C, CA, G, WC, WF, WD, WD-45, WD-45D, D-10, D-12, D-14, D-15, D-17 & up
(use with generator 0-30...alternator uses 0-60)

 
click picture to enlarge   

30-30 style (with Allis Chalmers in the face) 

(pn ACM-S258)

$30.00

 plus S.H.

Use with alternator
60-60

click picture to enlarge

60-60 style (with Allis Chalmers in the face) 

(pn ACM-DA4407V)

$33.00

 plus S.H.

 

Traction booster gauges     

WD, WD-45, D-10, D-12, D-14, D-15 (to sn 9000) D-17 (to sn 9000) 

 
click picture to enlarge   

cosmetic gauge..plain

(pn ACM-R4018)

$95.00

 plus S.H.

D-15 (from sn 9001)  D-17 (from sn 9001) 
D-21 

 
click picture to enlarge 

 cosmetic gauge..with Allis Chalmers in face 

(pn ACM-R4019)

$117.58

 plus S.H.

 
Tachometers and cables  

D-10,
D-12 to sn 9000

 

tachometer, bracket and clamp

replaces
#0232189
#232189
#70232189

(pn ACE-S311)

 

$190.00

 

D-10 up to sn 9000
D-12 up to sn 9000

tachometer cable

replaces
#0244104
#244104
#70244104

(pn ACE-S312)

$30.00

D-14, D-15 gas (up to sn 6630)
D-17 gas


click picture to enlarge 

tachometer

replaces:
#229755
#261728
#261779
#228818
#234094
Has AC on
gauge face

(pn ACM-S265)

$99.00

D-10, D-12 (prior to sn 9001)
All D-14, D-15 gas only


click picture to enlarge 

tachometer cable
without key

(pn ACM-DA70261606)

 $85.00

D-10, D-12 (prior to sn 9001)
All D-14, D-15 gas only

tachometer cable key adapter

(pn ACM-DA70261609)

 $10.20
D-15 gas  (sn 6631 & up)
1-60, 1-600

tachometer

replaces:
#236777

(pn ACM-S289)

$125.00

D-19 gas and diesel


click picture to enlarge 

tachometer

replaces:
#236655

(pn ACM-S296)

$150.00
D-21

tachometer

replaces:
#239731

(pn ACM-S278)

$175.00
 


Loader Buckets.  ** NEW **  

********************************************************************

Gear Shifter parts and pieces   

B, C, CA, G, ED40, WC,
WD, WD-45, WF, D-10,
D-12, D-14, D-15


click picture to enlarge

Gear shift lever washer and snap ring kit
(retains gear shift lever
into housing)

(pn ACM-S254)

$14.00

B, C, CA, G, WD, WD-45,
190XT, 210, 220, 7000,
7010, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070


click picture to enlarge

standard size pins

(pn ACM-S255)

$13.00 pair

B, C, CA, G, WD, WD-45,
190XT, 210, 220, 7000,
7010, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070


click picture to enlarge

oversize pins

must be ground to fit existing worn lever

(pn ACM-S253)

$13.00 pair

WD-45

click picture to enlarge

gear shift lever without pins

(pn ACM-S171)

$90.00

Hand crank spinner   

B, C, CA

 
click picture to enlarge

hand crank

JH 10

$37.50

WD, WD-45

  
click either picture to enlarge

NEW hand crank with spinner

(pn ACM-JH09)

$42.50


Shutter crank assembly
 
NEW  

shutter crank assembly


click picture to enlarge

NEW..
parts can be sold seperately...
handle $19.00
bolt $14.00
$32.00 complete assembly

 
Lower Radiator Elbow and hoses   

B, IB, C, CA, D-10,
D-12, D-14


click picture to enlarge

replaces #202560

(fits any hose with
1&1/4 inch OD)

$39.50

petcock


click picture to enlarge

fits lower radaitor pipe...and block  $3.95

B, IB, C, CA

radiator hoses
(2 short hoses..1 long hose)

3 per tractor

cut to length

$4.00 ea. short hoses...(2)

$6.00 for long hose...(1)

 
Caps  Radiator, Gas, Oil   

B, C


click picture to enlarge

Radiator cap
early original style
unpressurized system
rubber gasket

(pn ACRC-S045)

$12.00

B, C, CA, G, WC, WD, WD-45, D-10,
D-12, D-14, D-15, D-17, D-19, 170, 175, 180, 185

 
click picture to enlarge

Chrome gas cap 

(pn ACRC-MA1220)

 $9.50
D-10, D-12, D-14,
D-15, D-17, D-19,
170, 175, 180, 185
servicable for B,
IB, C, CA, G, RC,
Styled WC, WF, WD,
WD-45, WD-45D

vented gas cap
cork gasket

(pn ACRC-S043)

 

$10.00
D21 190 190XT 200 210 220 7000 7010 7020 7030 7040 7045 7050 7060 7080 7580 8550

Fuel Cap w/gasket

ACM  ACS 336

$19.00

Unstyled WC, UC,  M, WM


click picture to enlarge

Chrome gas cap

(pn ACRC-MA1020)

$9.50

B, C, CA, D-10, D-12,
D14, D-15, D-17,
D-19, D-21
(and any Allis Chalmers that has replaced
the original radiator with a replacement radiator)

   
click picture to enlarge

Radiator pressure cap


4 pounds pressure (pn ACRC-MA1410)

7 pounds pressure (pn ACRC-MA1411)

$8.50

D-10, D-12, D-14,
D-15, D-17, D-19,
D-21, H3, HD3, 170,
175, 180, 185, 190,
200, 140, 160


click picture to enlarge

Chrome Radiator pressure cap

original style

(pn ACRC-S209)

$12.00

D-10, D-12, D-14,
D-15, D-17, D-19,
D-21, H3, HD3, 170,
175, 180, 185, 190,
200, 140, 160


click picture to enlarge

This Radiator cap is "paintable"

(pn ACRC-DA4891V)

$12.50

G


click picture to enlarge

engine oil cap

(pn ACRC-S338)

$9.00

WD-45, 170, 175


click picture to enlarge

Oil fill cap with gasket

(pn ACRC-S286)

$20.00

CA, WD, WD-45,
D-10, D-12,


click picture to enlarge

hydraulic/transmission dipstick cap

(pn ACRC-S302)

$26.50

 
Step     

B, C


click picture to enlarge

step

(pn ACM-S272)

$60.00


Weights
   

B, C

 
click picture to enlarge

(pn ACM-S113)

frame weights
2 weights,2 bushings
(180 pounds..has to go truck freight)
NLA

CA

(pn ACM-S149)

frame weight LH, & RH 
(190 pounds..has to go truck freight)

NLA

B, C, CA and all with 3"x15" 5 hole rims

 
click picture to enlarge

(pn ACM-S037) 

front wheel weight  (45 pounds..shipped UPS)

attaching J-hooks available @ $2.50 each

    $ 89.00 each

RC, WC, WF, WD,
WD-45, D-15,
D-17, D-19

(pn ACM-S180)

front weight

weighs 74 pounds

replaces AM4162-3

$145.00 each

D-15, D-17, D-19



(pn ACM-S238)

3 piece weight bracket kit for AM4162-3

weighs 21 pounds

$198.00

RC, WC, WF, WD,
WD-45

(pn ACM-S234)

2 piece anchor kit for AM4162-3

LH & RH

weighs 2 pounds

$37.00

D-15, correct for D-17, D-19

(pn ACM-S239)

Anchor rod
9&1/4" overall length

Holds up to (4) AM4162-3 weights

weighs 1 pound

$16.00

RC, WC, WF, WD, correct for WD-45

(pn ACM-S241)

Anchor rod
7&3/4 overall length

Holds up to (3)
AM4162-3 weights

$15.00

J bolts


click picture to enlarge

bolt, nut, and lock washer


J bolts that go with this weight...
weight shown here only for explaination

$32.00 for the pair
 

Brake section     

B, C,
CA (left side only)


click picture to enlarge

brake drum

(pn ACM-S091)

 

$69.00

WD, WD-45, D-17

(pn ACM-R0560)

brake drum $65.00

G, D-10, D-12,
D-14, D-15

(pn ACM-R0561)

brake drum $75.00



Steering brake bands    

M, WM (crawlers)

 
click picture to enlarge

remanufactured steering brake bands
(requires a $50.00 refundable core charge)
when we get rebuildable band in return..
we will refund to you the $50.00
$124.00

 

Lined brake bands       

IB, B, C, CA


click picture to enlarge

ready to install with adjusting bolt

(pn ACM- 70276965

$59.50

IB, B, C, CA

 
click picture to enlarge

ready to install

(pn ACM-R0875)

$46.00

 

Reman brake bands  NEW ITEM   

WC styled and unstyled

 
click picture to enlarge

(pn ACM-FM09)

relined brake bands (we need your old bands in trade) refundable $50.00 ea. core charge required..

non-refundable if no bands available or are non rebuildable
If bolts need repaired or replaced, $10.00 extra  is charged

$80.00 (each side)

 

Brake shoe anchor pin.. NEW   

WD, WD-45,
D-17 (up to sn 42,000)

 
click picture to enlarge

(pn ACM-JH11)

replaces #232801 $16.00 ea.

 

Brake lining kits  (rivits included)

G    


click picture to enlarge

for one wheel $26.00

B, IB, C, CA  (rivits included)

 
click picture to enlarge

(pn ACM-R3536)

for one wheel $15.00

WD, WD-45, D-17 (to sn 42000)     

 
click picture to enlarge

(pn ACM-R3537)

for one wheel $15.50

D-10, D-12, D-14, D-15

(pn ACM-R3538)

for one wheel $26.00

D-17 (from sn 42001) D-19, D-21, 170, 180, 185, 190

(pn ACM-R3539)

for one wheel $16.50

D-17, 170, 175, 180, 185

(pn ACM-R2835)

for one disc $32.00

D-19, D-21, 190, 190XT, F, F2, K K2L

(pn ACM-R2836)

for one disc $30.00

 

Brake springs   

G


click picture to enlarge

brake rod return spring
9 & 9/16" overall length
replaces #800013)
2 used per tractor

(pn ACM-S300)

$25.00 ea.

G


click picture to enlarge

brake shoe return spring
2 & 3/16" overall length
replaces #800403
4 used per tractor

(pn ACM-S298)

$20.00 ea.

B, C, CA


click picture to enlarge

brake shoe return spring
3 & 1/2" overall length
replaces #207320

(pn ACM-S271)

$14.00 ea.

WD, WD-45, D-17,
D-19


click picture to enlarge

front brake spring
3" overall length
replaces #222500

(pn ACM-DA70232564)

$6.50 ea.

WD, WD-45


click picture to enlarge

brake rod return spring
6 & 5/8" overall length
replaces #222670

(pn ACM-S268)

$14.00

WD, WD-45, D-17


click picture to enlarge

brake shoe return spring (rear)
3 &3/4"overall length
replaces #222501

(pn ACM-DA70222501)

$13.00

D-10, D-12,
D-14, D-15


click picture to enlarge

brake shoe return spring

(pn ACM-S316)

$15.00

D-10, D-12,
D-14, D-15


click picture to enlarge

brake pedal return spring

(pn ACM-S321)

$15.50

Disclaimer:  Tony Carbaugh Enterprises LLC  (Tony  Carbaugh) are not responsible for any damage or loss due to the use of the products we sell.   It is up to the customer to determine how products are used and the customer takes full responsibility for any and all safe handling, and use.

Home | Allis Chalmers | John Deere | Ford | International Harvester
Oliver | Case | Links | About Us | Contact

12781 Marion Road SE
Turner, OR 97392
Phone: 503-767-3660
FAX: 503-769-3265
tony@tonystractors.com

©2004 Tony Carbaugh Enterprises, LLC ~ TonysTractors.com