|
mostl new products are shipped factory direct from MIDWEST locations.
We accept  (over the phone)
or check / moneyorder
Please inspect items upon arrival and notify us immediately of any damage caused by shipping or mis-handling for refund or replacement (30 days maximum) from time of purchase.
*** Prices subject to change without notice ***
Need Help ??  Or call 877-602-3994
prices on web page plus freight.
Main & Rod bearings
N-62 engine (Continental)
|
G
click picture to enlarge
|
main bearings all sizes available |
call for current prices...
toll free
877 602-3994 |
|
G pistons and rings
(set of 4)
click picture to enlarge
|
standards
20`s
60`s |
call for current prices...
toll free
877 602-3994 |
| G |
rod bearings |
call for current prices...
toll free
877 602-3994 |
 need help ? e-mail or call 877-602-3994
Crankshafts NEW..Standard Journals..bearings not included
|
G
(pn ACEC-S131) |
N-62 Continental engine
(25 pounds) |
Not Available |
|
WD-45 gas
(pn ACEC-S074) FORGED |
replaces #226535
(50 pounds) |
Not Available |
|
D-10, D-12, D-14, D-15 gas, I-60, I-600
(pn ACEC-S073) |
replaces #227550
(45 pounds) |
$399.00 |
Crankshaft Pulleys
|
WD, WD-45
click picture to enlarge
(pn ACEC-S069) |
with and without
power steering
replaces #227395
Double goove powersteering with
cone-shaped allen screw |
$185.50 |
|
Early D-10, D-12, D-14
click picture to enlarge
(pn ACEC-S089) |
5" pulley width 5/8"belt width
replaces #236741 |
$37.00 |
Late D-14, D-15 (149 engine)
(pn ACEC-S154) |
replaces #233396
5 1/16" pulleywidth, 3/8" belt width
fits crankshaft cast # 227 550 (pulley bore 1.120) |
$81.00 |
|
|
|
Governer Assemblies
|
B, IB, C, CA
(pn ACEC-R3533) |
NEW with magneto ignition..
complete with bearing |
$170.00 |
|
B, IB, C, CA, D-10. D-12, D-14, D-15
(pn ACEC-R3534) |
NEW with distributor ignition..
complete with bearing |
$170.00 |
|
|
|
Oil Filters and more
|
B, IB, C, CA, G, WD, WC,
WD-45, RC and early D-17
click picture to enlarge
|
oil filter
(pn ACEC-MA7011) |
$14.38 |
|
B, IB, C, CA, G, WD, WC,
WD-45, RC and early D-17
click picture to enlarge
|
oil filter tube..
copies
of original
(original in center of picture)
Pn JH-203899 |
$7.00 |
|
B, IB, C, CA, G, WD, WC,
WD-45, RC and early D-17
click picture to enlarge
|
cork oil filter
base gasket
pn 233228 ( O E M ) |
$4.00 |
|
D-10, D-12, D-14,
D-15, D-17, 170, 175
click picture to enlarge
|
oil filter
full flow
Gas engines
(pn ACEC-MA1452) |
$16.00 |
|
D-14, D-15 GAS
D-15Diesel, D-17, 170
click picture to enlarge
|
Hydraulic filters
pn. ACEC-MA 1049 |
$11.00 |
|
|
|
|
|
|
Pushrods
|
D-10, D-12, D-14, D-15
click picture to enlarge
(pn ACEC-F001) |
NEW |
$23.00 ea |
Plug Wire set, spark plugs
|
All tractors..4 cylinders
click picture to enlarge
(pn ACEC-MA700172) |
Heavy Duty solid core wire plug set |
$36.00 |
|
B, C, CA, G, IB, RC, WC, WD, WF,
D-14, D-17 gas..3/8" reach
click picture to enlarge
|
Autolite 295 |
$3.50 ea |
|
B, C, CA, G, IB, RC, WC, WD, WF, D-10, D-12, D-14, D-15, D-17, H3 crawler LPgas with 3/8" reach D-10, D-15, H3 crawler Gas
click picture to enlarge
|
Autolite 303 |
$3.25 ea |
|
|
|
|
|
| 
Valve Train kits
|
B, C, CA, RC, D-10,
D-12, D-14,D-15
125, 138, 149 gas engines |
valves, valve guides, springs, keepers |
Call for ptice |
|
WC, WD, WD-45, early D-17
201, 226 gas engines |
valves, valve guides, springs, keepers |
Call for price |
Engine block soft plug
|
B, C, CA, WC,
WD, WD-45
click picture to enlarge
|
block soft plug |
$3.95 ea. |
Gasket sets
|
G
(pn ( H - OS20657 ) |
pan gasket |
$5.75 |
|
G
click picture to enlarge
(pn ACEC-CX 07812 |
front crank seal |
$27.50 |
|
G
click picture to enlarge
(pn ACEC-49910) |
rear crank seal |
$10.95 |
|
G
click picture to enlarge
(pn ACEC-S001GK) |
exhaust gasket..includes carb gasket |
$8.50 |
|
G
(pn ACEC-HFS1850) |
full gasket set |
$72.00 |
|
G
(pn ACEC-HS1850) |
valve grind set |
$34.00 |
|
|
|
|
|
|
125 cu in engine
B, C, CA, IB, RC
|
B, IB, C, CA, RC
(pn ACEC-H 38373)/470206892 |
valve cover |
$16.85 |
|
B, IB, C, CA, RC
D-10 with 138 engine
(pn ACEC-MA30653)/470232325 |
pan gasket |
$13.00 |
|
B, IB, C, CA, RC
click picture to enlarge
(pn ACEC- 470277285 |
exhaust gasket set |
$13.16 |
|
B, IB, C, CA, RC
(pn ACEC-FS1606) |
full gasket set |
$68.47 |
|
B, IB, C, CA, RC
(pn ACEC-HS1606) |
valve grind set |
$39.00 |
|
B, IB, C, CA, RC
click picture to enlarge
(pn ACEC-MA14857) |
front crank seal |
$13.00 ea. |
|
|
|
|
|
|
201 and 226 cu in engines
WC, WD, WD-45, D-17, 170, 175
|
WC, WD, WD-45,D-17, 170, 175
(pn ACEC-470255297 |
valve cover gasket |
$ 22.00 |
|
WC, WD, WD-45,
D-17, 170, 175
(pn ACEC-470229860 |
pan gasket |
$19.08 |
|
WC, WD, WD-45,
D-17, 170, 175
(201 & 226 cu. in. engines..gas)
click picture to enlarge
(pn ACEC-474512715
|
exhaust gasket set |
$19.43 |
|
WC, WD, WD-45, WF
D-17, 170, 175
(pn ACEC-FS3162 |
full gasket set |
$147.91 |
|
WC, WD, WD-45, WF
D-17, 170, 175
(pn ACEC-H3162) |
vlave grind set |
$79.06 |
|
WC, WD, WD-45, D-15
Series II, Early D-17
click picture to enlarge
470275814
(pn ACEC-46026) |
front crank seal |
$13.51 |
|
WC, WD, WD-45,
Early D-17
click picture to enlarge
(pn ACEC-48125)/470227120 |
rear main seal |
$11.51 |
|
D-17, 170, 175
click picture to enlarge
(pn ACEC-H48162/470241294 |
rear main seal |
$11.07 |
|
D-17, 170, 175
click picture to enlarge
(pn ACEC-H47010) |
front crank seal |
$10.00 |
|
|
|
138 & 149 cu in engines
D-10, D-12, D-14, Early D-15
|
D-10, D-12, D-14, Early D-15
(pn ACEC-H 38286) |
valve cover gasket |
$16.94 |
|
D-10, D-12, D-14, Early D-15
(pn ACEC-0S30653) |
pan gasket |
$11.00 |
|
D-10, D-12, D-14, Early D-15
click picture to enlarge
(pn ACEC-470277232 |
exhaust gasket |
$14.00 |
|
D-10, D-12, D-14, Early D-15
(pn ACEC-FS3145) |
full gasket set |
$94.00 |
|
D-10, D-12, D-14, Early D-15
(pn ACEC-HS3145) |
valve grind set |
$52.33 |
|
|
| 
Fan Belts
|
G
click picture to enlarge
(pn ACRC-MA5L420) |
42" long |
$18.00 |
|
B, C
click picture to enlarge
(pn ACRC-MA2522336) |
with no generator
34.5" long |
$21.00 |
|
B, C, CA
click picture to enlarge
(pn ACRC-MA2522373) |
with generator
37&7/8" long |
$22.00 |
|
B, C power plant
without generator
(pn ACRC-MA2522322) |
32&3/4" long |
$19.00 |
|
WC, WD, WD-45
with generator
click picture to enlarge
(pn ACRC-MA2522461) |
46&1/8" long |
$27.00 |
|
|
|
|
|
|
|
|
|
Carburetors REMAN
|
G
click picture to enlarge
|
reman |
$249.00 exchange |
Carburetors NEW Zenith Replacement Carbs
G
(pn ACEC-S084) |
Marvel Schebler
replaces TSV 13 |
$375.00 |
| 00 |
|
B, C, CA, W, WC, WD, WF, D-10, D-12
click picture to enlarge
(pn ACEC-R0060) replaces 12401, 12749, TSX 154,
159, 305, 422, 470, 486 |
| |
CA, D-14, D-15, H3 crawler
(pn ACEC-R0062) |
replaces TSX 670,
701, 815, 844, 879, 912, 931 |
| .00 |
|
WD-45, D-15, D-17, 170, 175
 (pn ACEC-R0063)
replaces 11588, 12217, 13294, TSX 464,
561, 773, 853, 869, 871 |
$405.00 |
|
D-19, 190
click picture to enlarge
(pn ACEC-R0119) replaces TSX 848, 863 |
Carburetor Power Needles
|
Zenith carbs (fits unstyled WC and others...)
click picture to enlarge
(pn ACEC-DW71-28) |
load needle |
$20.50 |
|
Marvel Schebler and Zenith carbs
click picture to enlarge
(pn ACEC-DWC3NN9G504A) |
load needle |
$22.50 |
Main Nozzle
|
Marvel Schebler big bowl carburator.. main nozzle
click picture to enlarge
|
all marvel schebler with big bowl
(pn ACEC-DW312950) |
$24.00 |
Anti-surge spring
|
B, C, CA
click picture to enlarge
|
pn AC 212321
carb |
$15.00 |
Throttle springs
|
G
click picture to enlarge
|
governor control rod spring
replaces #800248
Measures 2 &1/2 overall length
(pn ACEC-S182) |
$8.00 |
|
WD, WD-45
click picture to enlarge |
throttle return spring
replaces #220923
Measures 6 &7/8 overall length
(pn ACEC-S267) |
$14.00 |
*********************************************************************************************************************************
 identifying tag on Marvel Schebler carb
click picture to enlarge
 identifying tag on Zenith carb
click picture to enlarge
*********************************************************************************************************************************
Carburator kits
Economy kit (includes gasket, needle and seat)
|
Unstyled WC, WF
click picture to enlarge
|
Zenith 7078, 7971
pn ACEC-R0394 |
$35.00 |
Basic kits (includes gaskets, needle, seat, and throttle shaft)
|
B, C, RC
(pn ACEC-R0148) |
Marvel Schebler (TSX 154, 305, 470, 485) |
$21.00 |
|
B, C, RC
(pn ACEC-R0076) |
Zenith (9705, 9706, 9804) |
$34.00 |
|
B, C, RC
click picture to enlarge
(pn ACEC-R0073) |
Zenith (10698, 10902, 10903, 10904) |
$34.00 |
|
B, C
(pn ACEC-R0072) |
Zenith (8561, 10699) |
$34.00 |
|
CA, D-14, D-15
(pn ACEC-R0074) |
Marvel Schebler (TSX 670, 701, 815) |
$27.00 |
|
CA, D-14, D-15
(pn ACEC-R0081) |
Zenith (11141, 11142) |
$34.00 |
|
RC
(pn ACEC-R2108) |
Zenith (9507, 9492) |
$27.00 |
|
W, WC, WD, WF
(pn ACEC-R0078) |
Marvel Schebler (TSX 159, 422) |
$34.00 |
|
WC, WD, WF
(pn ACEC-R0077) |
Zenith (8979, 9707, 10981) |
$34.00 |
|
WD-45, D-17
(pn ACEC-R0079) |
Marvel Schebler (TSX 464, 773, 871) |
$25.00 |
|
WD-45, D-17
(pn ACEC-R0080) |
Zenith (11588) |
$34.00 |
|
U, UC
(pn ACEC-R0075) |
Zenith (6496, 6699, 6817) |
$35.00 |
|
G
click picture to enlarge
(pn ACEC-R0071) |
Marvel Schebler (TSV-13) |
$27.00 |
|
|
|
Complete kits (includes basic kit..plus fuel and air adjusting screws and jets when available)
|
B, C
(pn ACEC-R0082) |
Zenith (8561, 10699) |
$54.00 |
|
B, C, RC
(pn ACEC-R0084) |
Zenith (9705, 9706) |
$54.00 |
|
B, C
(ACEC-R0086) |
Zenith (9804) |
$50.00 |
|
B, C
(pn ACEC-R0083) |
Zenith (10902, 10903) |
$49.00 |
|
B, C, RC
(pn ACEC-R0085) |
Zenith (10698) |
$54.00 |
|
CA
(pn ACEC-R2113) |
Zenith (11141, 11142) |
$49.00 |
|
RC
(pn ACEC-R2111) |
Zenith (9492, 9507) |
$54.50 |
|
W, WC, WD, WF
(pn ACEC-R0091) |
Marvel Schebler (TSX 159, 422) |
$40.00 |
|
WC, WF
(pn ACEC-R0090) |
Zenith (8979) |
$54.00 |
|
WC, WD, WF
(pn ACEC-R0087) |
Zenith (9707, 10981) |
$54.00 |
|
WD-45, D-17
(pn ACEC-R2112) |
Marvel Schebler (TSX 464, 773, 871) |
$49.00 |
|
U, UC
(pn ACEC-R2110) |
Zenith (6496, 6699, 6817) |
$49.00 |
|
|
|
Sediment bowl assemblies
|
G
click picture to enlarge
(pn ACEC-MA7302355) |
$49.50 |
|
B, C, RC, CA, D-14, D-17, D-19 (small bowl)
click picture to enlarge
(pn ACEC-R2404) |
$25.00 |
|
WC, WD, WD-45, WF, D-10, D-12, 170 (small bowl)
click picture to enlarge
(pn ACEC-R2405) |
$33.00 |
|
U, UC, WC, WF, WD-45,
D-15 gas (sn 9001 & up) D-15 Diesel
D-17 gas (sn 42001 & up),
D-19, D-21, 170, 175, 180, 185,
190, 190XT
(large bowl)
click picture to enlarge
(pn ACEC-R2406) |
$25.00 |
Sediment bowl assembly parts
|
brass screen
click picture to enlarge
|
3/8" diameter center hole
(pn ACEC-S229) |
$3.50 ea. |
|
gasket
click picture to enlarge
|
2" O.D.
(pn ACEC-S039) |
$3.00 ea. |
|
bail assembly with brass nut |
2 & 1/8" O.D.
(pn ACEC-S236) |
$14.50 |
glass bowl (small)  |
2" O.D.
(pn ABC S123
|
$3.25 |
| glass bowl (large) |
2 & 1/8" O.D.
(pn ACEC-S124) |
$4.50 |
|
gasket
click picture to enlarge
|
2 & 1/8" O.D.
(pn ACEC-S642) |
$1.75 ea. |
Carburetor floats
|
G
click picture to enlarge
(pn ACEC-R2381) |
use with Marvel Schebler carbs
TSV 13, 24 |
$32.00 |
|
B, C, CA, RC, WC, WD, WF, D-14, D-15
click picture to enlarge
(pn ACEC-R2382) |
Use with Marvel Schebler carbs
TSX 138, 154, 159, 186, 264, 305, 363, 380, 422, 470, 486, 670, 701, 815, 844 |
$13.00 |
|
B, C, RC, WC, WD, WF
click picture to enlarge
(pn ACEC-R2386) |
use with Zenith carbs 9705, 9707, 10981, 11141 |
$20.00 |
|
WD-45, D-15, D-17, 175
click picture to enlarge
(pn ACEC-R2383) |
use with Marvel Schebler TSX 464, 561, 773, 869, 871, 928 |
$24.50 |
|
D-15, D-19
(pn ACEC-R4012) |
use with Marvel Schebler carbs TSX 848, 863 |
$33.50 |
|
190
(pn ACEC-R3589) |
use with Holley carbs |
$63.50 |
|
|
|
|
|
|
Flywheel ring gear
|
G (with Continental N-62 engine)
(pn ACEC-R0583) |
86 teeth
(2 lbs) |
$59.00 |
|
B, C, CA
(pn ACEC-70209292) |
90 teeth
(2 lbs) |
$57.00 |
|
WC, WD, WD-45, WF
(pn ACEC-70208132) |
100 teeth
(2 lbs) |
$39.00 |
|
D-10, sn 3501 & up, D-12, sn 3001 & up, D-14, Trctor sn 19001 & up
as well as engine sn 19070 & up, D-15 Gas
click picture to enlarge
(pn ACEC-70233196) |
116 teeth,
(3 lbs) |
$50.00 |
|
D-17, 170, 175 (all with gas engine)
(pn ACEC-70226830) |
139 tooth
(2 lbs) |
$32.00 |
|
|
|
Shutter crank assembly " NEW "
Shutter crank assembly..
parts can be sold seperately...
handle $19.00
bolt $14.00 |
NEW
click picture to enlarge
|
$32.00
complete assembly
|
| Shutter spring |
click picture to enlarge
|
$13.50 |
Disclaimer: Tony Carbaugh Enterprises LLC (Tony, Carbaugh) will not be held responsible for any damage or loss due to the use of the products we sell. It is up to the customer to determine how products are used and the customer takes full responsibility for any and all safe handling, and use.
|
